what is the chemical name for baking soda?

Sodium-hydrogen-carbonate

what type of chemical is baking soda?

base

what is the chemical name for vinegar?

[acetic-acid]

What type of chemical is vinegar?

acid

a neutralization reaction occurs when...

an acid reacts with a base to produce water, salt, and sometimes gas.

we can determine the percent yield of a reaction by

dividing the actual yield by the theoretical yield and multiplying by 100

explain what it means when we say the mole ratio of vinegar to baking soda is 1.5:1

its means that the solution will contain 1.5 moles of vinegar and 1 mole of baking soda. there are more moles of vinegar and baking soda is the limiting reactant

explain what is means when we say that the mole ratio of vinegar to baking soda is 1:1.5

it means that the solution will contain one mole of vinegar and 1.5 moles of baking soda. there are more moles of baking soda and vinegar is the limiting reagent

if you react 25.25g of Na2CO3 with 50.0mL of 6.0M HCl, answer the following questions. (molar mass of Na2CO3 = 106.00 g/mol & molar mass of NaCl = 58.45 g/mol)
a.) write a balanced equation
b.) what type of reaction is this?
c.) How many moles of Na2CO3 do you have?
d.) How many moles of HCl do you have?
e.) how many moles of HCl do you need to completely react with 25.25 g of Na2CO3?
f.) What is the limiting reagent? What reagent is in excess?

a.) Na2CO3 + 2HCl yields 2NaCl + H2O + CO2
b.) neutralization reaction
c.) 0.2382 mol Na2CO3
d.) 0.30 mol HCl
e.) 0.4764 mol HCl
f.) limiting = HCl; excess = Na2CO3

1.75g of Ag2O is produced when 3.50 g of Ag reacts with excess O2. What is the percent yield?

4Ag(s) + O2(g) yields 2Ag2O2(s)

46.54%

What is oxidation?

the loss of electrons

What is reduction?

the gain of electrons

The oxidation number of an atom in a molecule or an ion is defined as...

the charge an atom has or appears to have as determined by the oxidation-reduction rules

An oxidation number can also be called...

an oxidation state

The best way to recognize an oxidation-reduction reaction is...

to see if the oxidation number changes as a result of the chemical reaction

What is the oxidation number of Mg(s)?

0

What is the oxidation number of H2(g)?

0

The algebraic sum of the oxidation numbers for the atoms of a neutral compound must be...

0

In a polyatomic ion, the sum of the oxidation number must be equal to...

the ion charge

What is the oxidation number of C in CO?

+2

What is the oxidation number of C in CO3 2-?

+4

What is the oxidation state of fluorine when combined with another element?

-1

The compound Ca(NO3)2 has ______ calcium atom, _______ nitrogen atoms, and ________ oxygen atoms.

1 calcium, 2 nitrogen, & 6 oxygen

In the compound Ca(NO3)2 for each mole of calcium ions there are ______ moles of nitrate ions and the mole ratio of calcium to nitrate ions is _______.

2 moles
1:2 ratio

What is a hydrate?

a compound that has water molecules loosely attached that can be removed by heating.

When the aluminum wire was placed in the solution of the copper ions, what was oxidized?

Al (s)

When the aluminum wire was placed in the solution of copper ions, what was reduced?

Cu 2+ (aq)

When the aluminum wire was placed in the solution of copper ions, what was the oxidizing agent?

Cu 2+ (aq)

When the aluminum wire was placed in the solution of copper ions, what was the reducing agent?

Al (s)

Why was an analytical balance used in the aluminum wire experiment?

because it is more accurate and can generate more sigfigs than the top loading balance

How was the top loading balance used in the aluminum wire experiment?

it was used to place slightly more than 1 gram of the unknown hydrate into the crucible

Why was the Buchner funnel used in the aluminum wire experiment?

it was used to quickly filter the copper out of the solution that was made

what is ethanol?

ethyl alcohol

why was ethanol added to the copper during filtering?

because it helps to dry the filter paper out because it has a lower boiling point than water

What is the entire name of 6M HCl

6 molar of hydrochloric acid

How did the temperature of the solution change when the wire was added?

temp. increased

Thermodynamically what type of reaction does an increase in temperature indicate?

exothermic reaction

Titration involves

the measurement of the exact volume of a solution of known concentration that is required to react with a measured amount of an unknown substance or solution

What is a standard solution?

a solution of known concentration

How is a primary solution made?

from a solid substance by accurately weighing the solid to four or more significant figures on the analytical balance. then the solid is added to a volumetric flask and diluted with distilled water to get a solution of known molarity.

A primary solution is made from a liquid by...

using a volumetric pipet to measure precise amounts of the liquid and then diluting in a volumetric flask

Because NaOH absorbs carbon] [dioxide and water from the air, it cannot be weighed accurately. Therefore, it cannot...

be a primary standard

After it has been standardized, the exact molarity of the NaOH is known & it can be...

used to standardize an unknown acid solution

Potassium hydrogen phthalate

a primary standard that can be used to standardize NaOH solutions

How many moles are needed to titrate one mole of KHC8H4O4?

one

Which acid-base indicator will be used in the experiment?

phenolphthalein

What is the color change in the acid-base reaction?

colorless to pink

We end the titration when...

one drop of the titrant causes the indicator to change color & the color stays for 30 seconds

The indicator color change indicates...

the end point of the titration and tells us the reaction is complete.

Know how to standardize HCl

pg. 83

Why wasn't it necessary to dry the Erlenmeyer flasks between samples in the standardization of HCl experiment?

you do not have to dry the flask because you are measuring a definite amount of acid into the flask for each trial & your calculations are based on the exact quantity of acid being added to the flask from the syringe. Therefore, the flask can contain distilled water or distilled water can be added without affecting the experiment

What mass of KHC8H4O4 would be neutralized by 25.25mL of 0.1034 M NaOH?

0.5332 g KHC8H4O4

How many mL of 0.1022 M NaOH are needed to neutralize 5.00 mL of a 0.1152M HCl solution?

5.64mL NaOH

Heat is...

a form of energy called thermal energy which can pass from an object at high temperature to an object at a lower temperature.

A calorimeter is...

a/an insulated container made so that no heat is lost from the container during the experiment

Styrofoam cups are used in this experiment because...

they are good insulators and relatively inexpensive

q H2O means...

the change in temperature of the water

C H2O means...

the specific heat of water

m H2O means...

the mass of water

delta t means....

the quantity of the heat of the water

Specific heat is...

the amount of heat required to raise the temperature of 1 gram of a substance by 1 degree Celsius

amounts of heat are measured in either...

[joules] or [calories].

the specific heat of water is...

4.18 joules/g(degrees celsius)

the boiling point is...

when the liquid molecules get enough energy from the added heat that they form vapor

Liquid boils when...

the vapor pressure = the atmospheric pressure

what is inside of the bubbles of a boiling liquid?

the gaseous liquid that is boiling

since atmospheric pressure decreases with increasing elevation, the water has a ....

lower boiling point at higher elevations

explain why the temperature of boiling water can be different on different days even if the elevation is the same

Air pressure changes when different weather fronts move through an area. The fronts cause changes in air pressures (highs and lows). Therefore, the temperature of boiling water can be different on different days even if the elevation is the same

enthalpy is...

the heat flow of reactions at constant pressure

if the temperature of the water in the calorimeter increases, then...

heat has been given off by the reaction mixture

If heat is given off by the reaction, then the reaction is _________. Therefore q H2O is ________ & enthalpy is _________.

exothermic, positive, & negative

Using what you learned about specific heat in lab, explain why an empty metal pan on a stove heats much faster than the same pan filled with water.

an empty metal pan on the stove heats much faster then the same pan filled with water because the metal pan has a much lower specific heat compared to water so it takes less time to heat.

Explain why your car overheats if your fan belt breaks

if your fan belt breaks there is no more air flowing through to cool the liquid that is absorbing the heat from the engine of the car.

explain why your car overheats if your radiator has a hole in it

your car would overheat if your radiator had a hole in it because all of the water would run out of the radiator so there would be no water flowing through the engine to absorb the heat, thus the car would overheat

delta t =

a change in temp.

how is delta t calculated?

by subtracting the final temp. minus that initial temp.

what is the chemical name of CaCl2?

calcium chloride

Why is CaCl2 often used in the winter to melt ice?

because when it is mixed with water (ice) the reaction is exothermic, thus the ice is melted & less dangerous

Charles Law states that....

at constant pressure the volume of a given gas is directly proportional to its Kelvin temperature

The objective of this experiment is to verify Charles Law by finding ...

the volume occupied by a gas at 2 different temperatures.

Charles law is verified if...

the volume-to-temperature ratios are close to the same number

Boyle's Law states that....

the volume of a fixed amount of gas at a constant temperature is inversely proportional to the pressure exerted on the gas

We will verify Boyle's Law by...

using a syringe that has a trapped column of gas and apply weights to increase pressure

Avogadro's Law states that...

the volume of a gas at constant temperature and pressure is directly proportional to the quantity of the gas

As you put more moles of air into a balloon the volume...

increases

Amonton's Law states...

at a constant volume and quantity, the Kelvin temperature and pressure of a gas are directly proportional

the combination of all the gas laws is the...

Ideal gas law

the equation of the Ideal gas law is

PV = nRT

STP

standard temperature and pressure

STP is defined as...

0C and 1 atm.

Molar volume of an ideal gas at STP is

22.4 L

Two 125mL _________ flasks will be used in the Charle's Law experiment

Erlenmeyer

What 2 types of clamps will be used in the Charles Law experiment?

Utility and screw clamps.

Closing the ______ clamp could cause the flask to _____ as the air expands

screw ; explode

Use the ______ clamp to remove the flask from the ________ water

utility ; boiling

When the flask is submerged in the cooling bath, check to make sure the rubber tubing ______ completely and the end of the tubing stays ______ the surface of the water.

opens ; below

The volume of the water in the 250mL graduated cylinder = volume of the _________ = volume of hot ________

flask ; air

Charles Law is proved if the difference of the k value is less than _____

0.050 mL/K

The Boyle's Law apparatus that is on your table has a ______ with a trapped column of air and a piece of _______ on top which is where you will put the weights

syringe ; wood

the weights in this experiment are ________

bricks

since the bricks are too heavy to weigh on the balances in the lab, they have all been ______ and ______ for you.

numbered & weighed

The Boyle's law apparatus is not perfect because there is ________ between the ________ and the ______ of the syringe

friction between the plunger & sides

Write the equation used to calculate % yield

(actual yield / theoretical yield) X 100

The reaction represented on page 109 is exothermic because...

; the products have less energy than the reactants

Chemists often use models made of balls and sticks or straws to represent...

atoms & bonds

Models are useful in visualizing the arrangements of atoms & bonds in these structures because...

molecules & atoms cannot be seen with the human eye

The atomic theory states...

that the chemical & physical properties of a substance are determined by the distribution of valance electrons and by the arrangement of the atoms in the molecule

A lewis structure is a...

two dimensional representation of a molecule or ion that shows the atomic symbols of the elements and dots or lines to represent electrons that are either in bonds or are unshared

The first step in drawing a Lewis structure is to...

determine the number of valance electrons

Electronegativity

the ability of an atom to attract ions to itself

What is the most electronegative element?

[Fluorine

If an atom does not obey the octet rule how many valance electrons does it have?

more than 8

Using the chart on page 121, what is the molecular geometry of a substance with the general formula of AX3E?

Trigonal Pyramidal

The general rule for bond length is...

that single bonds are the longest, double bonds are shorter, and triple bonds are the shortest of the 3 types

when compounds have more than one possible Lewis structure, these structures are called...

resonance forms

formal charge of an atom is defined as...

the total number of [valance] electrons of that atom minus the number of valance electrons it [owns] in the molecule: it owns [all] its unshared valance electrons and [half] of it’s shared valance electrons.