Calculate the value of the rate constant (k) for the reaction in question above

0.327
rate = k [A] [B]2

Any of the three experimental data sets can then be plugged in to solve for k. Plugging in the first experiment:

0.00110363 = k(0.15)(0.15)2

k = 0.327

If the initial concentrations of both A and B are 0.31 M for the reaction in questions 4 and 5, at what initial rate is C formed?

rate = 0.327 [A] [B]2

r ate = 0.327(0.31)(0.31)2 = 0.00974 M/min

We know that the rate expression for the reaction below:

2NO + O2 2NO2

at a certain temperature is rate = [NO]2 [O2]. We carry out two experiments involving this reaction at the same temperature, but in the second experiment the initial concentration of NO is doubled while the initial concentration of O2 is halved. The initial rate in the second experiment will be how many times that of the first?

2

Let's say that [NO] = x and [O2] = y in the first reaction. Therefore, in the second reaction, [NO] = 2x and [O2] = 0.5y.

If rate = k [NO]2 [O2]...

First reaction: rate = kx2y

Second reaction: rate = k(2x)2(0.5y) = 2kx2y

Therefore, the initial rate in the second experiment will be two times that of the first.

Consider the data collected for a chemical reaction between compounds A and B that is first order in A and first order in B:

rxn [A]0 [B]0 rate (M/s)
1 0.2 0.05 0.1
2 ? 0.05 0.4
3 0.4 ? 0.8

From the information above for 3 experiments, determine the missing concentrations of A and B. Answers should be in the order [A] then [B].

0.80M : 0.20M

Use trial 1 to determine the rate constant k.

rate = k[A][B] = k(0.2)(0.05) = 0.1

k = 10 M-1·s-1

Using trial 2, solve for [A]:

rate = 10(x)(0.05) = 0.4

x = 0.8 M

Using trial 3, solve for [B]:

rate = 10(0.4)(y) = 0.8

y = 0.2 M

For a reaction that is zero-order overall...

the rate does not change during the reaction.

Remember that for a zero-order reaction, the reactant is still used up. Its concentration will decrease as time passes, but the rate will not be affected. The rate will also not change for a zero-order reaction if you double or triple the concentration of that reactant.

Consider the reaction below:

A + B C

If it is 1st order in A and 0th order in B, a plot of ln[A] vs time will have a slope that is...

Constant

The first order integrated rate equation shows a linear relationship between the natural log of concentration and time.

Consider the reaction below:

H2CO3(aq) CO2(aq) + H2O(l)

If it has a half-life of 1.6 sec, how long will it take a system with [H2CO3]0 of 2M to reach [H2CO3] of 125mM?

4

At a certain fixed temperature, the reaction below:

A(g) + 2B(g) AB2(g)

is found to be first order in the concentration of A and zeroth order in the concentration of B. The reaction rate constant is 0.05s-1. If 2.00 moles of A and 4.00 moles of B are placed in a 1.00 liter container, how many seconds will elapse before the concentration of A has fallen to 0.30 moles/liter?

37.94

rate = k[A]

ln[A] = ln[A]0 - kt

[A]0 = 2.00 mol / 1.00 liter = 2 M

[A] = 0.3 M

\ln\left(0.3\:M\right)\:=\:\ln\left(2M\right)-\left(0.05\:s^{-1}\right)t

t = 37.94 sec

The reaction below:

A >>>>> products

is observed to obey first-order kinetics. Which of the following plots should give a straight line?

ln[A] vs t

The first order integrated rate equation is

ln[A] = ln[A]0 - kt

Since k and ln[A]0 are constants, this equation is in the form y = b + mx, where y = ln[A] and x = t. A straight line is produced by this equation.

For the reaction below:

cyclobutane(g) >>>>>>>>> 2ethylene(g)

at 800K, a plot of ln[cyclobutane] vs t gives a straight line with a slope of -1.6 s-1. Calculate the time needed for the concentration of cyclobutane to fall to 1/16 of its initial value.

1.7 sec

The initial concentration of the reactant A in a first-order reaction is 1.2 M. After 69.3 sec, the concentration has fallen to 0.3 M. What is the rate constant k?

0.02 s-1

A reaction is found to be first order with respect to one of the reactant species, A. When might a plot of ln[A] vs time NOT yield a straight line?

All the answers could be correct

If a reaction is first order with respect to species A, a plot of ln[A] vs time will yield a straight line only if the reactions is zeroth order with respect to all other species (first order overall) or if the concentrations of the other species is effectively constant (pseudo-first order). Additionally, the reaction should not come to equilibrium, as this will mean that the forward rate and backward rates are equal. At this point, the reaction rate will level off to a constant value. This is the same as having a significant backwards reaction.

Consider the following elementary reactions:

a) NO + O3 NO2 + O2

b) CS2 CS + S

c) O + O2 + N2 O3 + N2

Identify the molecularity of each reaction respectively.

bimolecular, unimolecular, termolecular

The elementary reactions given have two reactants, one reactant, and three reactants respectively. Therefore, they are bimolecular, unimolecular, and termolecular respectively.

A and B react to form C according to the single step reaction below:

A + 2B C

Which of the following is the correct rate equation for [B] and the correct units for the rate constant of this reaction?

Consider the mechanism below:

NO2 + F2 NO2F + F k1, slow

F + NO2 NO2F k2, fast

What is the rate law?

Determine the overall balanced equation for a reaction having the following proposed mechanism:

Step 1: B2 + B2 E3 + D slow

Step 2: E3 + A B2 + C2 fast

and write an acceptable rate law.

Consider the reaction below:

H2(g) + I2(g) 2HI(g)

The proposed mechanism of this reaction is:

I2 ⇌ 2I k1, k-1(reverse rxn), fast

2I + H2 2HI k2, slow

What is the rate of the overall reaction?

A reaction rate increases by a factor of 655 in the presence of a catalyst at 37°C. The activation energy of the original pathway is 106 kJ/mol. What is the activation energy of the new pathway, all other factors being equal?