Print Options

Card layout: ?

← Back to notecard set|Easy Notecards home page

Instructions for Side by Side Printing
  1. Print the notecards
  2. Fold each page in half along the solid vertical line
  3. Cut out the notecards by cutting along each horizontal dotted line
  4. Optional: Glue, tape or staple the ends of each notecard together
  1. Verify Front of pages is selected for Viewing and print the front of the notecards
  2. Select Back of pages for Viewing and print the back of the notecards
    NOTE: Since the back of the pages are printed in reverse order (last page is printed first), keep the pages in the same order as they were after Step 1. Also, be sure to feed the pages in the same direction as you did in Step 1.
  3. Cut out the notecards by cutting along each horizontal and vertical dotted line
To print: Ctrl+PPrint as a list

15 notecards = 4 pages (4 cards per page)

Viewing:

cardz

front 1

1. Which modifier, when held, enables you to mirror the outputs of a bus?

back 1

control

front 2

2. Which modifier, when held, enables you to show a send in Expanded Sends view?

back 2

cmd

front 3

3. Why would the pan knob in the Output window be greyed out?

back 3

fmp

front 4

4. True or False? A compressor's Attack Time parameters determines the amount of time the compressor will wait to begin compressing, after the signal has crossed the threshold.

back 4

true

front 5

5. What automation mode? - Automation will not be read

back 5

off

front 6

6. What automation mode? Automation will be read, but cannot be written

back 6

right

front 7

7. What automation mode? Automation will be written on all enabled parameters

back 7

touch

front 8

8. What automation mode? Affected by AutoMatch time

back 8

touch

front 9

9. What automation mode? Touched parameters will continue writing when released

back 9

latch

front 10

10. What is unique about touch automation?

back 10

FMP

front 11

11. Match the action to its shortcut: Paste Special > Merge

back 11

option + m

front 12

12. Match the action to its shortcut: Clear Automation

back 12

cmd + b

front 13

13. Match the action to its shortcut: Cut Automation

back 13

cmd + x

front 14

14. Match the action to its shortcut: Clear ALL Automation

back 14

option + shift + x

front 15

15. When should Dither be applied?

back 15

higher bit to lower bit