Print Options

Card layout: ?

← Back to notecard set|Easy Notecards home page

Instructions for Side by Side Printing
  1. Print the notecards
  2. Fold each page in half along the solid vertical line
  3. Cut out the notecards by cutting along each horizontal dotted line
  4. Optional: Glue, tape or staple the ends of each notecard together
  1. Verify Front of pages is selected for Viewing and print the front of the notecards
  2. Select Back of pages for Viewing and print the back of the notecards
    NOTE: Since the back of the pages are printed in reverse order (last page is printed first), keep the pages in the same order as they were after Step 1. Also, be sure to feed the pages in the same direction as you did in Step 1.
  3. Cut out the notecards by cutting along each horizontal and vertical dotted line
To print: Ctrl+PPrint as a list

5 notecards = 2 pages (4 cards per page)

Viewing:

Graphing Prelab SD

front 1

Using the data above, what would be the dependent variable?

  • Temperature
  • Volume

back 1

Temperature

front 2

What unit will appear on the X-axis?

  • K
  • L

back 2

L

front 3

The data above indicate that Volume will be on the X-axis. If the graph paper is 15 boxes wide by 20 boxes high, what increments will be appropriate for the X-axis?

  • 0.5
  • 0.3
  • 5
  • 10

back 3

10

front 4

The data above indicate that Temperature will be on the Y-axis. If the graph paper is 15 boxes wide by 20 boxes high, what increments will be appropriate for the Y-axis?

  • 0.5
  • 0.1
  • 0.745
  • 1

back 4

1

front 5

To find the slope of the "line of best fit", take any two values from the table of data points and find the slope between those points.

  • True
  • False

back 5

False