Print Options

Card layout: ?

← Back to notecard set|Easy Notecards home page

Instructions for Side by Side Printing
  1. Print the notecards
  2. Fold each page in half along the solid vertical line
  3. Cut out the notecards by cutting along each horizontal dotted line
  4. Optional: Glue, tape or staple the ends of each notecard together
  1. Verify Front of pages is selected for Viewing and print the front of the notecards
  2. Select Back of pages for Viewing and print the back of the notecards
    NOTE: Since the back of the pages are printed in reverse order (last page is printed first), keep the pages in the same order as they were after Step 1. Also, be sure to feed the pages in the same direction as you did in Step 1.
  3. Cut out the notecards by cutting along each horizontal and vertical dotted line
To print: Ctrl+PPrint as a list

10 notecards = 3 pages (4 cards per page)

Viewing:

Book 2 Ch 7 - Instrumentation & Control System Practice Quiz

front 1

In water treatment plants, pressure, liquid level and __________ are the
most commonly measured variables?

back 1

Flow rates

front 2

A clear tube with a tapered bore containing a ball or float that is used to
measure the flow rate of a gas or liquid is called what?

back 2

A rotometer

front 3

What type of flow measuring device requires little, if any, preventive
maintenance since there are no moving parts?

back 3

Differential pressure devices

front 4

What is an electrical method for transmission of data, and it is used when
the distance is quite far from the receiving station?

back 4

Telemetry

front 5

What is a common reason for malfunction of the instrument air supply of a
pneumatic signal transmission system?

back 5

Water and oil in lines

front 6

A confined space has three components:
1. Is large enough and configured that an employee can bodily enter and
perform work;
2. has limited or restricted means of entry or exit;
and what other condition?

back 6

Is not designed for continuous employee occupancy

front 7

What is the definition of precision?

back 7

The ability of an instrument to measure a process variable and repeatedly
obtain the same result; the ability of an instrument to reproduce the same
results

front 8

A confined space is found to contain a hazardous atmosphere and inwardly
converging walls. These conditions render the confined space:

back 8

A permit-required confined space

front 9

Bourdon tube, bellows or diaphragm arrangments are all types of what
measuring device?

back 9

Pressure sensors

front 10

The difference between the actual value and the desired value; the
characteristic of proportional controllers that do not incorporate reset action
(offset) is known as what?

back 10

Drift